0102030405
China Suppliers Factory Automatic Plasma Air Gouging Machine for Flawless Welds and Precision Metal Processing
Product Introduction
Plasma gouging is an advanced metal processing method that utilizes a high-temperature plasma arc (up to 30,000°C) generated by a plasma power source to locally melt metal workpieces. Simultaneously, high-velocity plasma momentum and compressed air rapidly blow away the molten metal, enabling precise material removal. This process is critical for welding repair, root cleaning, and grooving to ensure full weld penetration and structural integrity.
Key Applications
Weld Repair
Remove defective weld seams (porosity, cracks) without damaging the base metal.
Root Cleaning
Eliminate slag, oxidation, and impurities from the backside of welds for 100% fusion.
Grooving & Beveling
Create precise U/V-shaped grooves for multi-pass welding on thick plates.
Surface Defect Removal
Cleanse casting flaws, rust, or coatings before rewelding.
Component Showcase
Application Cases
Technical Parameters
| Model | WELD-HK-7WF-QB | ||
| Dimensions | 275*286*300mm | Gouging depth (standard) | 1.5-10mm |
| Weight | 10kg | Planer gun fine-tuning distance up and down | 50mm |
| Input power | AC220V/50Hz | Planer gun fine-tuning distance left and right | 50mm |
| Drive mode | Four-wheel drive, gear transmission | Planer gun fixed angle range | 30-90° |
| Walking speed | 150-1500mm/min | Planer gun swing range | 50mm |
| Gouging width (with oscillation) | 5-25mm | Planer gun swing frequency (when the swing width is 20mm) | 0-120 times/min |
Note: Standard linear aluminum guide rails are 1800mm long (customization within 3000mm), which can be spliced end to end and extended infinitely. Optional polymer material two-dimensional curved guide rails are used for gouging curves with R≥1500mm. The length of the guide rails is 1500mm, which can be spliced end to end and extended infinitely.
Frequently Asked Questions
Q: What is the operating principle of plasma gouging?
It utilizes a high-temperature plasma arc (up to 30,000°C) to locally melt the metal workpiece, while high-velocity plasma momentum and compressed air blow away the molten metal to achieve precise material removal.
Q: What are the primary applications of this equipment?
This process is mainly used for weld repair (removing defects like porosity and cracks), root cleaning (removing slag and impurities), grooving & beveling (for multi-pass welding), and surface defect removal.
Q: What is the standard gouging depth and width for model WELD-HK-7WF-QB?
The standard gouging depth ranges from 1.5 to 10mm, and the gouging width is 5 to 25mm when utilizing the oscillation feature.
Q: What guide rail options are available for different gouging paths?
It supports standard linear aluminum guide rails (1800mm, customizable up to 3000mm) and optional polymer two-dimensional curved guide rails (1500mm) for curved gouging with a radius (R) ≥1500mm. Both types can be spliced infinitely.
Q: How adjustable is the planer gun on this machine?
The planer gun features a 50mm fine-tuning distance both vertically (up/down) and horizontally (left/right), a fixed angle adjustment range of 30-90°, and a swing range of 50mm.



